pond stat
Moderators: B.Scott, vippymini, Gazza, Manky Sanke
-
- Nurse Shark
- Posts: 87
- Joined: Fri Sep 30, 2011 3:31 pm
- Location: Essex
Re: pond stat
Header 5 parameter table in the manual will give you an idea of what you need to be looking at.
Haven't got my one anymore to be able to break down the explanation once you get the jist of the lingo written there not to bad to change.
Haven't got my one anymore to be able to break down the explanation once you get the jist of the lingo written there not to bad to change.
Re: pond stat
cheers dave, is it the dif i need to be looking at? not sure how to access the options
cheers
tom
cheers
tom
-
- Nurse Shark
- Posts: 87
- Joined: Fri Sep 30, 2011 3:31 pm
- Location: Essex
Re: pond stat
For what I recall you press P and then the arrow down don't quote me on this as I haven't got the manual to look at I remember the header 5 as this was the table of settings it should be under parameters.
Double check though Tom as I say it's been a while since I messed around with one of them units, there may be someone else on here that still has one, that may be able to assist.
Failing that if you have the manual there should be a tech support number on there.
Double check though Tom as I say it's been a while since I messed around with one of them units, there may be someone else on here that still has one, that may be able to assist.
Failing that if you have the manual there should be a tech support number on there.
Re: pond stat
cheers dave will have a look when i get home, ive e mailed their support team but had no reply
tom
tom
-
- Nurse Shark
- Posts: 87
- Joined: Fri Sep 30, 2011 3:31 pm
- Location: Essex
Re: pond stat
If you don't have any joy let me know I will try and download the manual if I can find it on the Webb to see if I can jog my memory.
I used to use one when I was breeding discus got it from an aircon engineer at the time as they use these as well or they did not bad units to be honest.
I used to use one when I was breeding discus got it from an aircon engineer at the time as they use these as well or they did not bad units to be honest.
Re: pond stat
cheers dave, got advised to press and hold p for 5 secs but all it does is go to 0, ive attached instructions, cheers for your help so far, http://controlteconline.com/images/stor ... /TLZ11.pdf i think i understand what to do but not sure what peramter setting to onto
tom
tom
Re: pond stat
got it sorted dave cheers for your help, had to turn stat off then press and hold p then turn stat on and that got me into menu i needed
tom
tom
-
- Nurse Shark
- Posts: 87
- Joined: Fri Sep 30, 2011 3:31 pm
- Location: Essex
Re: pond stat
Nice one mate glad you got it sorted at last