hi can anyone help me with my pond build ???
Moderators: B.Scott, vippymini, Gazza, Manky Sanke
hi can anyone help me with my pond build ???
hi all im new to this forum but not to koi keeping lol. what im wanting to know is im planing on rebuilding my pond as its at ground leveal and im wanting to build it up above ground. im thinking of doin it with breeze blocks could anyone tell me any tips ??? thanks
Re: hi can anyone help me with my pond build ???
hi and welcome
i presume your wanting to build up your existing pond so its above ground,
what you need to do is excavate the top edge all around so you can form a 12" x 12" concrete ring with reinforcing rods then you can build up off this
with your blocks to the height you want( lay the breeze blocks on their sides for strength)
then either butyl liner it or have it laid up in glass fibre
duncan
i presume your wanting to build up your existing pond so its above ground,
what you need to do is excavate the top edge all around so you can form a 12" x 12" concrete ring with reinforcing rods then you can build up off this
with your blocks to the height you want( lay the breeze blocks on their sides for strength)
then either butyl liner it or have it laid up in glass fibre
duncan
Re: hi can anyone help me with my pond build ???
hi duncan thanks for the welcome and for replying mate verry gratfull. yes im build up my existing pond so its above ground and could i just use normal liner ??
Re: hi can anyone help me with my pond build ???
yes you can use any type of liner but obviousley butyl is bestjordan wrote:hi duncan thanks for the welcome and for replying mate verry gratfull. yes im build up my existing pond so its above ground and could i just use normal liner ??
duncan
Re: hi can anyone help me with my pond build ???
bet its out of my price range too pmsl!! you know when i do the concrete ring but its goin to be squre not a ring do i have to dig in the ground so far or can i just poor concrete on the floor and flattern it out?? also where do i put the reinforcing rods ?? on eatch corner ??
Re: hi can anyone help me with my pond build ???
Hi,
This persons pond build may help you a little
http://www.koiphen.com/forums/showthrea ... ge-of-pond
Also you definately don't want to use breeze blocks, it's concrete blocks you need.
Have fun
Dave
This persons pond build may help you a little
http://www.koiphen.com/forums/showthrea ... ge-of-pond
Also you definately don't want to use breeze blocks, it's concrete blocks you need.
Have fun
Dave
Re: hi can anyone help me with my pond build ???
hi there thanks i will have a look at it mate and why dont you think i should use breeze blocks ??
koicarpus wrote:Hi,
This persons pond build may help you a little
http://www.koiphen.com/forums/showthrea ... ge-of-pond
Also you definately don't want to use breeze blocks, it's concrete blocks you need.
Have fun
Dave
Re: hi can anyone help me with my pond build ???
Breeze blocks are just not as strong.
They absorb water, which can freeze in cold spells and crack the block.
Have a look around the web you'll see what I mean.
Good luck
Dave
They absorb water, which can freeze in cold spells and crack the block.
Have a look around the web you'll see what I mean.
Good luck
Dave
Re: hi can anyone help me with my pond build ???
thanks mate i will do
koicarpus wrote:Breeze blocks are just not as strong.
They absorb water, which can freeze in cold spells and crack the block.
Have a look around the web you'll see what I mean.
Good luck
Dave